Quality Standards and Environmental Certifications

A80602 and A80605: High Power LED Driver with Pre-Emptive Boost for Ultra-High Dimming Ratio and Low Output Ripple

A80602 Datasheet A80605 Datasheet
Navigate

Description

The A80602 and A80605 are multi-output LED drivers for automotive applications such as exterior lighting, heads-up display, and mid-size LCD backlighting. They implement a current-mode boost/ SEPIC converter with gate driver for external N-MOSFET. This allows greater output power even at minimum supply voltage.

这些设备提供了六个集成的电流汇，每个串的驱动电流高达140毫安。多个接收器可以并联在一起，以获得更高的LED电流高达840毫安。在这种情况下，4台ICs启动后可以继续工作，并能承受4.5伏启动时的汽车电源。

The A80602 and A80605 can control LED brightness through external PWM signal. By using the patented Pre-Emptive Boost control, an LED brightness contrast ratio of 15,000:1 can be achieved using PWM dimming at 200 Hz.

The A80605 offers a modified programming range for PEB control, optimized for lower boost switching frequencies (e.g., 400kHz).

Featured Applications include:

  • Automotive infotainment backlighting
  • Automotive heads-up display
  • Automotive interior and exterior lighting

Top Features

  • Automotive AEC-Q100 qualified
  • Enhanced fault handling for ASIL B system compliance
  • Wide input voltage range of 4.5 to 40 V for start/stop, cold crank, and load dump requirements
  • Operate in Boost or SEPIC mode for flexible output
  • Gate driver for external NMOS to deliver higher output power
  • Six integrated LED current sinks, up to 140 mA each
  • Boost switching frequency synced externally or programmed from 200 kHz to 2.3 MHz
  • Programmable boost frequency dithering to reduce EMI
  • Advanced control allows minimum PWM on-time down to 0.3 μs, and avoids MLCC audible noises
  • LED contrast ratio: 15,000:1 at 200 Hz using PWM dimming alone, 150,000:1 when combining PWM and analog dimming
  • Excellent input voltage transient response even at lowest PWM duty cycle
  • Gate driver for optional PMOS input disconnect switch
  • Extensive fault protection features
× not found

Part Number Specifications and Availability

Part Number Package Type Temperature RoHS
Compliant		 Part Composition /
RoHS Data		 Comments Samples Check Stock
APEK80602KES-01-MH DEMO BOARD -20°C to 85°C No -- Contact your
local sales rep		 Check
Distributor Stock
APEK80602KES-01-MH-1 DEMO BOARD -20°C to 85°C No -- Contact your
local sales rep		 Check
Distributor Stock
A80602KESJSR 24-lead QFN -40°C to 125°C Yes View Data Contact your
local sales rep		 Check
Distributor Stock
A80602KESJSR-1 24-lead QFN -40°C to 125°C Yes View Data Contact your
local sales rep		 Check
Distributor Stock
A80605KESJSR 24-lead QFN -40°C to 125°C Yes View Data Contact your
local sales rep		 Check
Distributor Stock
A80605KESJSR-1 24-lead QFN -40°C to 125°C Yes View Data Contact your
local sales rep		 Check
Distributor Stock

Allegro’s products are not to be used in any devices or systems, including but not limited to life support devices or systems, in which a failure of Allegro’s product can reasonably be expected to cause bodily harm.

Allegro 24-contact QFN ES Package

Packaging

24-Pin 4 mm x 4 mm QFN with Wettable Flank